Securing a logix designer application project file, Securing a logix designer application, Project file – Rockwell Automation Logix5000 Controllers Security Programming Manual User Manual

Page 14: Securing a logix, Designer application project file

Chapter 2 Configuring FactoryTalk Security with Logix Designer application

Once you have configured the Logix Designer application to be security aware, the

next step is to enable security in a project file. Follow these steps to secure a project

file.

1. Open Logix Designer.

a. Click the Start button, then click All Programs, then click

Rockwell Software, and then click Studio 5000.

b. If prompted to Log On to FactoryTalk, type your FactoryTalk

User name and Password, and then click OK.

In the example below, the FactoryTalk Directory (FTD) was
configured with an account called FTADMIN.

2. Open the project file that you want to secure. This example uses the

DayOfWeek project file, which is installed with the software. From the
Menu bar, click Help, then click Vendor Sample Projects. On the Quick

Start screen, click Open Sample Projects, and then find the
DayOfWeek.ACD file. Click the DayOfWeek.ACD and then click Open.

Securing a Logix Designer
application project file

Rockwell Automation Publication 1756-PM016G-EN-P - October 2014