Rockwell Automation 1770-KF2 Data Highway or Highway Plus Interface Module User Manual - Manual (Page 8)

Introduction
Chapter 1
1-4
Table 1.B lists KF2 module specifications.
Table 1.B
KF2 Module Specifications
Specification Requirements
Communication Rates
•
Data Highway: 57,600 bits per second (recommended)
•
Peer Communication Link: 57,600 bits per second
(recommended)
•
Asynchronous: Switch selectable from 110 to 9.600 bits
per second
Functions
•
Interface a programmable RS-232-C or RS-422-A
compatible device with an Allen-Bradley Data Highway.
•
Serve as a replacement for a 1771-KD Communication
Controller Module.
Location
•
Tabletop (or other horizontal surface)
•
Controlled environment, e.g., office or control room
Communication Ports
•
Data Highway: 15-pin male EIA D-connector
•
Peer Communication Link: 15-pin male EIA
D-connector
•
Data Highway Monitor: 9-pin female EIA D-connector
•
Asynchronous (RS-232-C/RS-422-A): 25-pin male
EIA D-connector
Cabling
•
Data Highway: Data Highway Dropline Cable
(Cat. No. 1770-CD)
•
Asynchronous RS-232-C: User-Supplied Data
Terminal Interface Cable or Modem Interface Cable
•
Asynchronous RS-422-A: User-Supplied Data Terminal
Interface Cable
Power Requirements
•
Selectable: 115 V/60 Hz or 230 V/50 Hz
•
Watts: 3.5
Ambient Temperature
Rating
•
32 o F to 113 o F (0 o C to 45 o C) Operational
•
-40 o F to 185 o F (-40 o C to 85 o C) Storage
Ambient Humidity Rating
•
10% to 80% Non-Condensing
Physical
•
Size: 10-3/8 in. x 10.0 in. x 3-3/8 in. (263.5 mm x
254 mm x 85.7 mm)
•
Weight: 6.0 pounds (2.7 Kg)
Specifications