Rockwell Automation 1757-PROCESSLINX ProcessLinx OPC Server to Server Software User Manual - Manual (Page 39)

Publication 1757-UM002B-EN-P - January 2003
ProcessLinx TagMap Configuration 3-19
ProcessLogix Control Point parameters are dependant upon the type of
control point or function block being referenced. The following tables
display only the control points used most frequently in interfacing to
other OPC Server blocks.
ModeInError
VT_BOOL Read only
SetPointInError
VT_BOOL Read only
OutputInError VT_BOOL Read only
InLowAlarm VT_BOOL Read only
InHighAlarm VT_BOOL Read only
PointInAlarm
VT_BOOL
Read only
Table 3.H Accumulator Point Parameters
OPC Server parameter
name OPC Type OPC Access
PV VT_I2 R/W
EUHI VT_R4 Read only
RawPVValue VT_I4 R/W
PVInError
VT_BOOL
Read only
Table 3.I Table 7.D Control Point Parameters for a PID or PIDA block
OPC Server parameter name OPC Type OPC Access
PV
VT_I4 R/W
MODE VT_I4 R/W
OP VT_I4 R/W
SP VT_I4 R/W
PVEULO VT_R4 Read only
Table 3.G Analog Point Parameters