Rockwell Automation 1757-PROCESSLINX ProcessLinx OPC Server to Server Software User Manual - Manual (Page 17)

Publication 1757-UM002B-EN-P - January 2003
Getting Started 2-3
Configure ProcessLinx
Options To configure ProcessLinx Options select from the Utility menu, Utility
⇒
Configure Options or click in the tool bar. You see:
Figure 2.3 Options Dialog Box
Automatically startup in runtime mode when ProcessLinx is started
This option starts ProcessLogix in runtime mode. This change takes
effect the next time you start the program. If unchecked then you must
manually place ProcessLinx in runtime mode. Default is unchecked.
On auto startup into runtime mode, minimize the program window
This option is used to control whether or not the program starts
minimized or not. On startup if the “Automatically startup in runtime
mode…” is checked then the program window will be minimized.
Default is unchecked.
In runtime mode, ping remote hosts first to verify they exist before
attempting a connection to Remote OPC Server (requires TCP/IP)
This option should always be enabled for all remote OPC Server(s)
communicating via TCP/IP. If checked, ProcessLinx pings the remote host
before attempting an OPC connection to it. If this option is not enabled and