Rockwell Automation Logix5000 Controllers Nonvolatile Memory Programming Manual - Manual (Page 25)

Store and load a project by using a memory card Chapter 1
5. Click Yes to store the project.
The table describes the events that occur for the memory card being used.
If using This happens during the store operation
CompactFlashCard • On the front of the controller, the OK status indicator displays the following
sequence: flashing green> solid red> solid green.
• Logix Designer application goes offline.
• A dialog box indicates the store is in progress.
SD Card • On the front of the controller, the SD and OK status indicators flash green.
• The Status Display shows SAVE. See
Store a project on page 17 .
• Logix Designer application goes offline.
• A dialog box tells you that the store operation is in progress.
6. Click OK.
When the store operation is finished, you remain offline.
Rockwell Automation Publication 1756-PM017F-EN-P – October 2014 25