Installing optional extension modules, Chapter, Install extension modules – Rockwell Automation 1441-DYN25-MBAL Balancing Extension Module for the Dynamix 2500 User Manual
Page 7

Rockwell Automation Publication 1441-UM004A-EN-P - May 2011
7
Chapter
1
Installing Optional Extension Modules
The data collector uses the Extension Manager to install and uninstall extension
modules. These extension modules are licensed and ordered separately from the
basic entry-level product.
Install Extension Modules
The installation Secure Digital (SD) cards that you receive work with any
Dynamix 2500 data collector. Once you have installed an extension module, the
card is locked so that it can only be used with that instrument.
You can uninstall extension modules if required. When uninstalling an extension
module, you have the option to free up the license so you can install the extension
module on another instrument. This makes the extension module available to be
transferred between units.
Follow these instructions to install an extension module.
1.
Open the base cover at the bottom of the Dynamix 2500 data collector.
2.
Place the extension module SD card contact side-up into the unit until it is
firmly seated in place.
3.
Close the base cover.
Topic
Page
Extension Module Battery Status Indicators
IMPORTANT
One installation SD card is required for each instrument that needs to
be upgraded.
IMPORTANT
When ever you re-run the OS Loader software, you will re-load only the
main OS firmware. The OS loader will backup licence files and data, but
not the optional extension modules. Once you have updated the OS
firmware, insatll the latest version of your optional extension modules.
See the Dynamix 2500 Data Collector User Manual,
, for
more information.