Rockwell Automation 1441-DYN25-MBAL Balancing Extension Module for the Dynamix 2500 - Manual (Page 64)

64 Rockwell Automation Publication 1441-UM004A-EN-P - May 2011
Chapter 2 Balancing Extension Module
If you go to any data collection screen and press Enter you are retaking the
balance run from that location on the Go to screen.
How to Delete Stored Files
1. From Recall, Review or Save screens you are able to select a file to delete.
2. Press 0 to display a second set of functions.
3. Press F4 (Delete).
You are prompted to confirm the deletion.
4. Press Yes and the file is deleted from the data collector.
TIP When you save, all previous measurements are overwritten as you
go through the balancing process. If you need to keep the Balance
run you are reviewing, use the save as function to create a new
file. Only vibration data from prior steps is retained.