Accessories – Rockwell Automation 1606-XLS240UPSD Power Supply Reference Manual User Manual
Page 22

All parameters are specified at an input voltage of 24V, 10A output load, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
It is assumed that the input power source can deliver a sufficient output current.
22
Rockwell Automation Publication 1606-RM017A-EN-P — February 2014
Bulletin 1606 Switched Mode Power Supplies
25. Accessories
Battery Modules
Two pre-assembled battery modules with a single 12V battery are available for different buffer times. As an option,
the mounting brackets are also available without batteries. This option offers more flexibility in selecting an
appropriate battery, which can also save on shipping expenses. See individual datasheets for detailed information.
1606-XLSBATASSY1
1606-XLSBATASSY2
Battery type
Standard version
12V, 7Ah
High current version
12V, 26Ah
VRLA lead-acid maintenance free
battery
Service life
3 to 5 years
10 to 12 years According
to
EUROBAT
guideline
Dimensions
155x124x112mm
214x179x158mm
Width x height x depth
Weight 3.2kg
9.9kg
DIN rail mountable
yes
no
Order number
1606-XLSBATASSY1
1606-XLSBATASSY2
Battery module
1606-XLSBATBR1 1606-XLSBATBR2
Mounting
bracket
without
battery
1606-XLSBAT1 1606-XLSBAT2
Replacement
battery
only
Fig. 25-1 1606-XLSBATASSY1
Fig. 25-2 1606-XLSBATASSY2
1606-XLB Wall / Panel Mounting Bracket
This bracket is used to mount the DC-UPS units onto a flat surface without using a DIN rail. The two aluminium
brackets and the black plastic slider of the DC-UPS must be removed to allow the installation of the two surface
brackets.
Fig. 25-3
1606-XLB Wall / Panel Mounting Bracket
Fig. 25-4 Assembled Wall / Panel Mounting Bracket