Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 32)

32 PowerMonitor 1000 Unit
Rockwell Automation Publication 1408-IN001E-EN-P - September 2013
3. Press or once.
Program appears in the display. Press .
4. Press if the password has not been changed from the default (0000).
If the password has been changed, then enter the correct password.
When the correct password is entered, Program Setup appears in the display. The power
monitor is now in Program mode.
If an incorrect password is entered, Invalid Password appears. Press any button to try
again.
PowerMonitor 1000
RS-485 STATUS
RX TX Mod Net
Password

0000
PowerMonitor 1000
RS-485 STATUS
RX TX Mod Net
Program
Setup