Alarm mode, Alarm target, Measurement parameter monitored – Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor User Manual
Page 41: Maximum or minimum amplitude detected
Rockwell Automation Publication 1412-UM001D-EN-P - September 2012
41
Display Modes
Chapter 3
Alarm Mode
Press the alarm display mode button -
• Starts alarm capture
• Stops alarm capture
• Deletes all stored alarms
Alarm memory status bar (indicates available alarm storage memory)
Alarm target
Measurement parameter monitored
Maximum or minimum amplitude detected
Alarm duration
Use the Up/Down Cursor buttons to select an alarm.
Use the Left/Right Cursor buttons to display alarms within a period of time.
TIP
The threshold values must first have been programmed in the instrument
setup mode.
TIP
All the alarms recorded can be downloaded to a PC with the DATAVIEW
software. Up to 4096 alarms can be captured.
See
for information on using DATAVIEW software.
IMPORTANT
The Alarm values for PF, DPF, Tan, j, W, and VAR are absolute values.
TIP
The type of connection selected in the mode has no influence on the
possibilities of choices, target and monitored parameter. The user is
responsible for making pertinent choices.
07/25/02 11:27
100%
3L
L1
L2
L3
1
2
4
3
5
<
07/25/02
11:27
L1
L1
L1
L1
L1
L2
L1
L2
L3
L1
L1
Vthd
Vrms
Vthd
Vthd
Arms
Arms
Arms
Arms
Arms
Vrms
Vthd
23.1%
0V
34.3%
35.0%
1A
1A
0A
0A
0A
109V
35.1%
2s
1s24
1s
s
1s
1s5
1s3
1s9
1s9
1s8
3s37
3s
2/2
11:28
11:29
1
100
s
1
100
s
1
100
s
1
100
s
1
100
s
1
100
s
1
100