Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor - Manual (Page 21)

Rockwell Automation Publication 1412-UM001D-EN-P - September 2012 21
Operation Chapter 2
Set Recording
Follow these steps to select which parameters the PowerPad unit records.
1. Highlight RECORDING with the Up/Down Cursor buttons, then press
Enter.
This screen appears.
Four recording set-ups are available.
2. Choose recording configuration 1, 2, 3, or 4 with the Up/Down Cursor
buttons.
3. Next, move through the choices with the Left/Right Cursor buttons and
select the desired parameters with the Up/Down Cursor buttons.
As you move through the parameters, each choice, in turn, is highlighted.
4. To activate the selected parameter for recording, use the Up/Down Cursor
buttons.
The selected parameters will have a filled in diamond shape and those not
selected will have an unfilled diamond shape.
User-defined Parameters
There are two user-defined parameters at the bottom of the window. At first, they
will be listed as a question mark (?). These parameters let you monitor specific, or
a range, of voltage, current, or power harmonics. Follow these steps to activate
these parameters.
1. Use the Left/Right Cursor buttons to select the parameter.
2. Use the Up/Down Cursor buttons to scroll through the available choices:
Uh, Vh, Ah, and VAh.
3. Once the desired parameter is selected, use the Right Cursor button to
move to the first modifiable field for this parameter.
A value from 00…50 can be selected for this field.
4. Use the Up/Down Cursor buttons to select the value.
5. After selecting the desired harmonic order for the beginning value, press
the Right Cursor button to move to the upper value.
SET-UP
Hz Hz
If these options are not
selected, all the harmonics
(odd and even) are
recorded.