Starter selection, For 6 or 12 lead wye-delta wound motors, For 3- or 9-lead closed delta-type motors – Rockwell Automation 150-E SMC Elevator Users Manual User Manual
Page 8
8
Rockwell Automation Publication 150-UM009D-EN-P - February 2011
Chapter 1 Introduction
Starter Selection
For 6 or 12 Lead Wye-Delta Wound Motors
The following table lists the catalog numbers that can be used with 6 or 12 lead
Wye-Delta motors. For proper operation, the connection should be verified
during installation. Sample connection diagrams for INSIDE-THE-DELTA
connected motors are included in the Installation and Wiring section found later
in this manual.
Table 1 - Cat. Nos. For Use with 6- or 12-Lead Wye-Delta Motors
➊
Motor FLA must fall within the specified range to operate correctly.
For 3- or 9-Lead Closed Delta-Type Motors
The following table lists the catalog numbers that can be used with 3- or 9-lead
closed delta type motors. For proper operation, the connection should be verified
during installation. Sample connection diagrams for LINE connected motors are
included in the Installation and Wiring section found later in this manual.
Table 2 - Cat. Nos. For Use with 6 or 12 Lead Closed Delta-Type Motors
➊
Motor FLA must fall within the specified range to operate correctly.
Hp at Nominal Ratings
Overload Range
➊
Control Voltage Cat. Nos.
200V
240V
480V
575V
120V
230V
10
10
20
30
10.9…32.9
150-E32NCE-FC
150-E32NCA-FC
15
15
30
40
17…51
150-E51NCE-FC
150-E51NCA-FC
20
20
40
60
21.3…64
150-E64NCE-FC
150-E64NCA-FC
20
25
50
60
24.7…74
150-E74NCE-FC
150-E74NCA-FC
30
40
75
100
34.7…104
150-E104NCE-FC
150-E104NCA-FC
40
50
100
150
49…147
150-E147NCE-FC
150-E147NCA-FC
75
75
150
200
59…234
150-E234NCE-FC
150-E234NCA-FC
Hp at Nominal Ratings
Overload Range
➊
Control Voltage Cat. Nos.
200V
240V
480V
575V
120V
230V
5
5
10
15
6.3…19
150-E32NCE-FC
150-E32NCA-FC
7.5
10
20
25
10…30
150-E51NCE-FC
150-E51NCA-FC
10
10
25
30
12.3…37
150-E64NCE-FC
150-E64NCA-FC
10
15
30
40
14.3…43
150-E74NCE-FC
150-E74NCA-FC
15
20
40
50
20…60
150-E104NCE-FC
150-E104NCA-FC
25
30
60
75
28.3…85
150-E147NCE-FC
150-E147NCA-FC
40
50
100
125
34…135
150-E234NCE-FC
150-E234NCA-FC