Rockwell Automation 20-750-PBUS Profibus DPV1 Option Module - Manual (Page 11)

Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012 11
Chapter
1
Getting Started
The 20-750-PBUS option module is intended for installation into a PowerFlex
750-Series drive and is used for network communication.
Components
Topic Page
Components 11
Features 12
Understanding Parameter Types 13
Compatible Products 13
Required Equipment 13
Safety Precautions 16
Quick Start 17
7
8
6
5
4
3
2
1
➊
➋
➌
➍
Item Part Description
➊ Status Indicators Three status indicators that indicate the
status of the option module and network
communication. See
Chapter 7 ,
Troubleshooting .
➋ Node Address Switches
(Switches 1…7) Sets the node address of the option
module. See
Setting the Endianness and
Node Address Switches on page 20 .
Endianness Selection
Switch (Switch 8) Sets the endianness of data transmitted
over network.
➌ Selection Jumper Selects between Profibus or Profidrive
operation mode.
Important: This feature is not supported
in this version, so changing the jumper
position will not have any effect. The
Profibus operating mode is selected with
either position.
➍ Profibus DB9 Female
Connector Profibus connector for the Profibus
network cable.