Rockwell Automation 56RF RFID System User Manual - Manual (Page 57)

Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011 57
Chapter
7
RSLogix 5000 Controller Tags
During the module installation, the RFID_1 tags are automatically loaded as
controller tags. This makes the tags available to all programs.
In the Controller Organizer, click on the Controller Tags.
Three categories of tags appear. The tag name is comprised of the module name
followed by a:
• “:C” for Configuration
• “:I” for Input
• “:O” for Output.
Configuration Image Table
and Tags Expand the RFID_1:C by clicking the “+” box. This shows the configuration
image table, which has the following tags:
• Ch0BaudRate – The baud rate for communication for Channel 0 from
the RFID block to the RFID transceiver is stored in this tag. Allowable
baud rates are 9600, 19200, 38400, and 115200. The default value is
115200.
• Ch1BaudRate – The baud rate for communication for Channel 1 from
the RFID block to the RFID transceiver is stored in this tag. Allowable
baud rates are 9600, 19200, 38400, and 115200. The default value is
115200.