Rockwell Automation 20D-MDI-C1 Multi-Device Interface Option Board for PowerFlex 700S Drives - Manual (Page 15)

Multi-Device Interface Option Board for PowerFlex® 700S Drives 15
Step 9: Install the Phase II
Control Cassette Covers In order to install the Phase II Control Cassette in the drive, you must first
install the covers.
Installing the Phase II Cassette Covers
Figure 11 Registration Sensor connection
Connection Examples
POWER
COMMON
12
11
10
9
8
7
6
5
4
3
2
1
Rotary Encoder +COS
Rotary Encoder DATA+ (RS485)
Rotary Encoder REGISTRATION-
Linear Sensor REGISTRATION+
Linear Sensor CLOCK+
Rotary Encoder DATA- (RS485)
Linear Sensor DATA+
Linear Sensor CLOCK-
Linear Sensor DATA-
Rotary Encoder REGISTRATION+
Linear Sensor REGISTRATION-
CHASSIS GND
MDI Feedback Option Board
17
16
15
14
13
Rotary Encoder POWER COMMON
Rotary Encoder POWER
Rotary Encoder +SIN
Rotary Encoder REFSIN
Rotary Encoder REFCOS
EXTERNAL
12 or 24 Vdc
POWER
SUPPLY
Rotary
Registration Sensor
Linear
Registration Sensor
Power +
Common
Power +
Common
Proper tightening torque
for reassembly is 6
lb.•in.
Installing the Side Covers
Task Description
Secure the rear cover to the cassette with three
screws.
Secure the front cover to the cassette with two
screws.
A
B
=
A
B