Yamato Scientific WR600S AutoPure - Manual (Page 5)

Environmental Conditions
Ambient storage and operating temperature
Humidity
5°C < T < 40°C
20 % - 80 % without
condensation
Hydraulic specifications
Feedwater tubing
Reject tubing
Inlet feedwater pressure
Feedwater delivery flowrate
Feedwater temperature
8 mm outer diameter (OD), length : 3 meters maximum
8 mm and 6 mm OD, length : 2.5 meters maximum
Minimum: 0.1 bar (1.5 psi)
Maximum: 0.5 bar (7 psi)
≥ 1.5 litre/minute (LPM)
5 °C to 37 °C
Feedwater quality
Yamato recommends using water treated by distilled water or Reverse Osmosis.
System performances
Purified water quality
Resistivity 18.2 M Ω-cm at 25 °C
Pyrogens < 0.02 EU/ml
TOC*
<20 ppb (WR600A)
<5 ppb(WR600G)
<25 ppb(WR600B)
<10 ppb(WR600S)
Flowrates
Product water flowrate Up to1.5 litre/minute
Up to 1.0 litre/minute
Sound level at 1 metre distance in dB extremely low
l Test conditions: Autopure WR600 was equipped with a Q-Gard pre-treatment pack and a QUANTUM EX cartridge. The
feedwater to the Autopure WR600 came from a RiOs Reverse Osmosis system. TOC levels in the feedwater were < 50 ppb.
The quality of the Autopure WR600 product water can vary as a function of the quality of the feedwater.