Yamato Scientific HF200 Heating Block - Manual (Page 16)

12
2. How to operate the unit
Auto-stop operation
2.Set the temperature.
Measured Temp.
Fixed Temp.
Set Temp.
Auto Stop
Auto Start
Heater
Alarm
START
STOP
TIMER
SUB MENU 4sec.
℃
Set the desired temperature with ▼ and ▲ keys.
The set temperature rises with the ▲ key and lowers
with the ▼ key.
The temperature can be changed even in the course of
operation.
3. Select the auto-stop mode.
Measured Temp.
Fixed Temp.
Set Temp.
Auto Stop
Auto Start
Heater
Alarm
START
STOP
TIMER
SUB MENU 4sec.
℃
Press the TIMER key lightly to allow the
AStP indicating the auto-stop operation
mode to appear. The Set Temp. screen shows the time.
Indicates AStP that means the auto-stop
operation mode.
Indicates the time set immediately before operation.
4. Set the time of the timer.
Measured Temp.
Fixed Temp.
Set Temp.
Auto Stop
Auto Start
Heater
Alarm
START
STOP
TIMER
SUB MENU 4sec.
℃
Set the time with ▼ and ▲ keys.
The time display screen changes to flashing and the
screen changes to the time setting screen.
The timer can set over a range from 0.01（1 minute） to 999.5（999 hours 50 minutes）.
The timer indicates the time in minutes from 0.01 to 99.59 and in ten minutes from 100.0
to 999.5.