Yamato Scientific BB600 Low Constant Temperature Water Bath - Manual (Page 47)

44
Handling Precautions
WARNING!
If a problem occurs
If smoke or strange odor should come out of this unit for some reason, turn off the power key
right away, and then turn off the circuit breaker and the main power. Immediately contact a
service technician for inspection. If this procedure is not followed, fire or electrical shock may
result. Never perform repair work yourself, since it is dangerous and not recommended.
Measure for flammability and handling of flammable solvent
This unit is not designed as the explosion-proof construction. Pay special attention to the
handling of the sample to be handled with this unit on the consumption with the explosive
material, flammable material, and similar ones. The flammable material may be vaporized by
leaving it at the temperature higher than room temperature, and could cause the fire or
explosion. When handling such material, provide ventilation with enough before the operation.
(Refer to page 59 “List of Dangerous Substances”.)
Keep the unit well-ventilated
Keep the air holes in the side and back of the unit open during operation. If they are closed, the
inside temperature of the unit may increase, its performance may deteriorate, or an accident,
malfunction or fire may result.
Exercise care not to allow a liquid to get on the unit
Exercise care not to allow a liquid to get on the unit or enter the unit through the air intake or
louver in the side or back of the unit. If it enters the unit, stop the operation. Otherwise. an
accident, malfunction, electric shock or fire may result.
Do not drop metallic pieces into the unit
Do not drop metallic pieces, such as clips, staples and screws, into the unit. If such a metallic
piece has dropped into the unit, turn it off. An accident, malfunction, electric shock or fire may
result.
Do not open the panels and covers
Do not operate the unit with the fixed panels and covers open. An accident, malfunction or
electric shock may result.
Do not operate the unit with the filter for the air intakes removed
Do not operate the unit with the filter for the air intakes removed. An accident, malfunction or
electric shock may result.
Do not modify
Do not modify this unit. An accident, malfunction, electric shock or fire may result.