Yamato Scientific BB600 Low Constant Temperature Water Bath - Manual (Page 14)

11
Description and Function of Each Part
Characters of the Controller
The characters controller shows are as follows:
Character Identifier Name Purpose
FiX
Fixed Temperature
Setting Mode
Used for setting the fixed temperature
operation.
Sv Temperature Setting Used for setting the temperature.
AStP Auto Stop Setting Used for setting the auto stop operation.
AStr Auto Start Setting Used for setting the auto start operation.
tim Time Setting Used for setting the time.
End Time-up Displayed when timer operation is ended.
cAL
Calibration Offset
Setting
Used for inputting the calibration offset
temperature. (Refer to Page 23 "Calibration
Offset Function".)
oH
Overheating
Prevention Setting
Used for setting temperature for overheating
prevention device. (Refer to Page 15 "Setting of
Overheating Prevention Device ".)
LocK Key Lock
Locks the keys on control panel to protect from
unnecessary operation. (Refer to Page 24
"Lock Function".)
* Also refer to Page 14 "Operation Mode, Function Setting Key, and Characters".