Description and function of each part, Control panel – Yamato Scientific BB600 Low Constant Temperature Water Bath User Manual
Page 13
10
Description and Function of Each Part
Control Panel
No. Name
Function
①
RUN/STOP
Key：
Starts/stops the operation.
②
▲▼ Key：
Uses for rising UP/lowering DOWN the setting value.
③
SUB
MENU
Key：
Uses for setting the overheating prevention temperature, calibration
offset temperature, or key lock function.
④
ENTER
Key：
Settles the inputted value.
⑤
FIXED
TEMP
Key：
Chooses the fixed temperature operation.
⑥
TIMER
Key：
Chooses the timer operation (Quick Auto Stop/Auto Stop/Auto Start).
⑦
HEATER
Lamp：
Lights while the heater works.
⑧
ALARM
Lamp：
Lights up when an error occurs. (Buzzer sounds simultaneously.)
⑨
AUTO STOP Lamp：
Blinks while setting quick auto stop timer or auto stop timer.
Lights while quick auto stop timer or auto stop timer is running.
⑩
AUTO START Lamp：
Blinks while setting auto start timer.
Lights while auto start timer is running.
⑪
FIXED
TEMP
Lamp：
Blinks while setting fixed temperature operation.
Lights while fixed temperature operation is running.
⑫
Measurement Temperature
Display：
Displays the measured temperature, setting character, alarm
information.
⑬
Setting Temperature
Display：
Displays the setting temperature, setting value for timer mode,
remaining time.
⑭
Overheating Prevention
Temperature Display：
Displays the setting temperature for overheating prevention device.
⑦
⑧
⑨
⑩
⑪
④
⑤
⑥
②
③
①
⑭
⑬
⑫