Titus Displacment Ventilation - Manual (Page 7)

DVVC Installation
Installation Manual
DV 5-9-13
Step 1
Drill the holes on the bottom plate of
the unit and the mounting base. Install
the mounting base into place using
screws. Step 3
Install wall bracket to the wall to hold the
top of the unit using screws.
Commissioning (Balancing)
The balancing port is positioned on the
side behind the decor strip. The K-factor of
the unit is stated on the K-factor label
mounted on one of the side of the
balancing port. The k-factor can also be
found on our website in the relevant k-
factor guide. See Figure 5
Step 2
Install wall brackets to the wall using
screws and slide the bottom of the unit
into the angle wall brackets.
3.0
FIGURE 4