Bac-8007 draft7_29, Setting up local lighting control, Balancing airflow – Titus Alpha BAC-8007/BAC-8207 Dual Duct User Manual
Page 26

BAC-8007 and BAC-8207 VAV Controllers
Setting up dual-duct controllers
Setting up local lighting control
26
Setting up local
lighting control
Automatic local lighting can controlled by the motion sensor in an STE-8201
connected to the controller. Local lighting is set up either with software or an
attached STE-8201.
Lighting control enable When enabled, local lights will be turned on or off based
on motion detected by an STE-8201.
Light off delay Sets the interval local lights will remain turned on after the last
motion is detected by an STE-8201.
Lighting equipment is connected to the controller as described in the topic
Connecting outputs on page 16
.
Balancing airflow
An airflow balancing program is included in BAC-8000 series controllers. See the
manual STE-8000 and STE-8201 Sensor Installation Guide for balancing
instructions.
Table 3-4 Local lighting options
Object Description
Name
Default
BV11
Lighting Control Enable
LIGHTING CONTROL Enable
AV42
Light off delay
LITE OFF DELAY
15 minutes