Stainless Works Chevy S10 LS Headers 1994-2004 - Manual (Page 2)

WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183
13. Floor of cab on both sides will need flattened for clearance. Some fabrication
work on the A-arms is also required for proper clearance.
14. Apply a small ribbon (approx. 3/16” in dia.) of RTV Silicon around each primary
tube on the header flanges and wait ten minutes prior to installation.
15. Install left (Driver side) header from top first. Tighten header bolts to OEM specs.
16. Install right (Passenger side) header from bottom. Tighten header bolts to OEM
specs.
17. Reinstall all accessory items, etc.
18. Be sure to have adequate clearance around all wires, hoses and lines. If anything
is in contact with the exhaust system, it will melt. Make sure to have at least
½” of clearance and wrap any suspect areas with DEI thermal barrier wrap.