Stainless Works Ford F-150 2011-2014 5.0L Exhausts - Manual

WWW.STAINLESSWORKS.NET 800-878-3635 FAX: 440-543-9183
EXHAUST INSTALLATION INSTRUCTIONS FOR
2011+ FORD F-150 5.0L 145” WHEELBASE
Thanks for purchasing a Stainless Works catback for your 2011+ Ford F-150 Supercrew or
Supercab truck (145” WB). We have gone to great pains to make sure that our exhaust systems
fit and sound great. Please follow these steps to ensure that your installation goes as planned.
1. Disconnect the battery before starting work on the exhaust system for your vehicle.
Reconnect the battery when the job is completed.
2. Your exhaust system can be installed by a weekend warrior but the use of a lift is
recommended for ease of installation. If using a jack, the vehicle must be placed on a
level hard surface and jack stands are required for safety reasons.
DISASSEMBLY
1. Raise and support vehicle.
2. Disconnect battery.
3. Unbolt (2) bolts at factory connection point after catalytic converters and remove the
old exhaust system.
ASSEMBLY –
Steps 4 and 5 below are not needed when installing true duals to Stainless
Works Headers
4. Install gasket (G917B-S) supplied on flanged pipe (resonator delete pipe) and install
using supplied 3/8” bolts washers, nuts.
5. Install Y-pipe using 3” clamp.