Stainless Works Chevy/GMC Truck 2007+ Exhaust: 6.2L User Manual
Stainless Works For the car

WWW.STAINLESSWORKS.NET
800-878-3635
FAX: 440-543-9183
2007-2013 CHEVY SILVERADO/ GMC SIERRA TRUCK
DUAL EXHAUST INSTALLATION INSTRUCTIONS
Thanks for purchasing a Stainless Works Dual Exhaust System for your Chevy Silverado
or GMC Sierra Truck. We have gone to great pains to make sure that our exhaust
systems fit and sound great. Please follow these steps to ensure that your installation
goes as planned.
1. Raise and level the vehicle, if possible.
2. Disconnect Battery.
3. Unbolt (2) 15mm bolts at Y-Pipe.
4. Remove old exhaust system from rubber hangers. Save rubber hangers for re-use.
It may be necessary to cut the tail pipe in front of rear end for easier removal.
5. Install Y-Pipe using (2) 3/8” supplied bolts and hardware. (only required for
catback installation to manifolds – not headers).
6. Install lead pipes with 2.5” Accuseal clamps and hanger with 2.5” dia. saddle
clamps. Note on some trucks, this hanger is placed on the top of the leadpipes.