Stainless Works Ford F150 2009-2010 Exhaust User Manual
Stainless Works For the car
WWW.STAINLESSWORKS.NET
800-878-3635
FAX: 440-543-9183
2009-2010 FORD F-150 5.4L TRUCK
DUAL EXHAUST INSTALLATION INSTRUCTIONS
Thanks for purchasing a Stainless Works Dual Exhaust System for your Ford F-150 5.4L
Truck. We have gone to great pains to make sure that our exhaust systems fit and sound
great. Please follow these steps to ensure that your installation goes as planned.
1. Disconnect Battery.
2. Raise and level the vehicle, if possible.
3. Remove (2) 15mm bolts connecting the exhaust to the (2) bolt flange.
4. Remove old exhaust system from rubber hangers. Save rubber hangers for re-use.
Remove the exhaust from the truck.
5. Install donut gasket to Y-Pipe and install, using (2) 3/8” x 2-1/2” long supplied
bolts and hardware. (only required for catback installation to manifolds – not
headers).
6. Install lead pipes with 2.5” Accuseal clamps and hangers with 2.5” dia. saddle
clamps (only required for catback installation to manifolds – not headers)
7. Install (2) Accuseal clamps and mufflers.
8. Install (2) Accuseal clamps and the (2) tail hangers with saddle clamps onto the
tailpipes