Quadrox WebCCTV Installation Manual - Manual (Page 18)

WebCCTV Installation Manual 18
Version 4.4 Series
2.3.2 Connecting WebCCTV to the local network
When you start your WebCCTV, Windows XPe detects your network adapter and
automatically starts the local area connection. Unlike other types of connections, the local area
connection is created automatically, and you do not have to click the local area connection in
order to start.
A local area connection is the only type of connection that is automatically created
and activated.
To establish connections of another type follow the steps below:
1. Click Start -> Settings -> Control panel -> Network connections
2. In the Network connections window click File-> New connection. You’ll see the
following window:
Network Connection Wizard Screen
Follow the prompts the network connection wizard provides to define your unit in the network.
For obtaining more detailed information about your network settings, please contact
your system administrator.