MacDon 3020 Pull-Type Windrower - Manual (Page 85)

74
ATTACHMENTS
The following attachments are available from your
Dealer:
PTO CONVERSION KIT – 1000 to 540 RPM
WholeGoods order number: B1354
To convert windrower to match your tractor PTO
speed.
Kit includes front yoke of driveline, decal and
instruction for interchange of main drive pulleys.
See "Preparing the Windrower" in Operation
section to determine if kit is required.
NARROW DELIVERY OPENING KIT
21’, 25’ & 30’ – WholeGoods order number B2847
36’ – Parts order number 32918
For 21, 25 and 30 ft. windrowers, this kit allows
delivery opening to be narrowed to 45-1/2 inches
(1155 mm).
Kit includes draper track extensions, drive belt and
draper extension.
For 36 ft. windrower, the draper extension alone is
required to narrow the delivery opening to 52-3/4
inches (1340 mm).
See "Delivery Opening" in Operation section for
installation instructions.
HITCH PLATE
WholeGoods order number: B1495
To convert windrower hitch to clevis type for
tractors with straight drawbar.
See "Preparing the Windrower" in Operation
section for installation instructions.
LEFT HAND DIVIDER ROD
Parts order number: 29792
A divider rod may be added to the left divider to
prevent catching in crops such as rape or flax. See
"Right Hand Divider Rod" in Operation section.
SIDE DRAFT STABILIZER KIT
WholeGoods order number: B1855
Standard on 36’ (and 30’ Australian units), this kit
may be added to smaller units to counteract side
draft in hilly or wet conditions.
DRAPER DRIVE ROLLER LAGGING KIT
WholeGoods order number: B2543
For conditions where draper must be overly
tightened to prevent slippage, kit provides lagging
for two draper drive rollers.