MacDon 3020 Pull-Type Windrower - Manual (Page 21)

10
OPERATION
ATTACHING WINDROWER TO TRACTOR
(continued)
5. Connect the windrower wiring harness plug (A)
to outlet on tractor.
6. Connect hydraulic hoses to tractor remote
cylinder control valves.
7. For 36 ft. units only: Attach stabilizer chain to
tractor-mounted anchor plate as follows:
- Windrower must be in transport position; or, if
in field position, tractor must be situated as in a
right turn.
- Attach chain (B) to anchor plate, securing with
pin (C) and hair pin (D).
ATTACH STABILIZER CHAIN - 36 ft.
CONNECT WIRING HARNESS
A