MacDon R85 Rotary Disc 13 Foot - Manual (Page 86)

MAINTENANCE AND SERVICING
169454
84
Revision C
11. Insert driveline (K) into deflector (M) and
install onto shaft. Ensure that driveline (K)
grease zerks will be accessible through large
opening in deflector.
12. Align mounting holes in deflector (M), spindle,
and driveline (K), and re-install four bolts (J).
13. Torque bolts to 92 ft·lbf (125 N·m).
14. Adjust the upper driveline shield (P) to
achieve consistent gap around deflector
shield (M).
15. Tighten bolts (N) on shield plates (O).
e. Remove block of wood (if used).
WARNING
Ensure cutterbar is completely clear of
foreign objects. These objects can be ejected
with considerable force when the machine is
started, and may result in serious injury or
machine damage.
f. Close doors.
K
M
J
L
N
P
O
O
M