Caution – MacDon R85 Rotary Disc 13 Foot User Manual

Page 43

OPERATION

169454

Revision C

6.11 TRANSPORTING MOWER

CONDITIONER

The R85 Mower Conditioner can be transported
on public roads by towing with a tractor or a
truck. Proceed to Section 6.11.1 Transporting
With A Tractor, or 6.11.2 Transporting With A
Truck.

CAUTION

 Be aware of roadside obstructions,

oncoming traffic and bridges.

 Travel speed should be such that

complete control and machine stability
are maintained at all times. Do NOT
exceed 20 mph (32 km/h). Reduce speed
for corners and slippery conditions.

 When transporting on roads, use tractor

lights and mower conditioner flashing
amber and red tail-lights to provide
adequate warning to operators of other
vehicles.

 Do NOT transport the mower conditioner

on a road or highway at night, or in
conditions, which reduce visibility, such
as fog or rain.

6.11.1 Transporting With a Tractor

If the mower conditioner is in Transport Mode,
proceed as follows. Otherwise, see Section
6.11.4 Preparing Mower Conditioner for
Transport.

a. Hook-up mower conditioner to tractor. See

Section 6.4 MOWER CONDITIONER/

TRACTOR HOOKUP for details on attaching the
mower conditioner to the tractor.

NOTE

The hydraulic hoses do not need to be
attached to the tractor for towing. Ensure
they are securely stored on the APT hitch.

NOTE

The PTO does not need to be attached for
towing purposes.

b. If not attached, lower hook (A), store driveline

(B) on hook, and remove forward half of
driveline. Store forward half in cab for transport.

c. Ensure that APT hitch safety chain (D) is

properly attached to towing vehicle. Provide
only enough slack in chain to permit turning.

d. Check local laws for width regulations and

lighting or marking requirements before
transporting on roads.

e. Do NOT exceed 20 mph (32 km/h).