MacDon R85 Rotary Disc 13 Foot - Manual (Page 118)

OPTIONS AND ATTACHMENTS
169454
116
Revision C
9 OPTIONS AND
ATTACHMENTS
9.1 SKID SHOE KIT
The skid shoe kit installs at either end of the
cutterbar. The shoes can be adjusted to vary
cutting height. The kit includes two skid shoe
assemblies and attachment hardware.
9.2 TALL CROP DIVIDER KIT
The tall crop dividers attach to the ends of the
header for clean crop dividing and reel entry in tall
crops. The kit includes left and right dividers, and
attachment hardware.
9.3 CUTTERBAR REPAIR TOOL KIT
The cutterbar repair tool kit contains the
necessary tools for replacement of the cutterbar
idler gears. Refer to the Technical Service
Manual for instructions.
9.4 HYDRAULIC CENTER-LINK KIT
This kit allows the header angle to be adjusted
hydraulically with a cylinder replacing the standard
mechanical link, and uses a separate hydraulic
circuit from the tractor. Installation instructions
are included with the kit.
9.5 PRESSURE GAUGE KIT
This kit allows the Operator to monitor the
header operating load on the machine with the
installation of a pressure gauge on the APT
hitch. Installation instructions are included with
the kit.
9.6 TRUCK TRANSPORT HITCH
This kit allows the mower conditioner to be
attached to a truck for towing on the road. The
kit includes the transport hitch, attachment
hardware, and safety chain.