Save a dash, Save_a_dash – Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & BigComm Software User Manual

Page 99

Text mode
Original mode

BigStuff3 Pro SEFI System (LS1)

Version 1.0

In the screen print below notice that the same “Signals” appear in the Dash at the bottom of the
Cranking Fuel screen.

70. Save a Dash

Again, the recommended way to configure the “Default Dash” is to configure each of available
dash’s, or most frequently used dash’s, to your liking and then save them as the “Default Dash”.

This way, every time you open the BigComm software, the dash’s will be open to the preferred
configuration.

Available
Signals

Signal in the
Dash

Cranking
Fuel Dash