Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & BigComm Software - Manual (Page 63)

BigStuff3 Pro SEFI System (LS1)
Version 1.0 62
• Interpolate – If a series of cells in the same row are selected and the “Interpolate” “cell-
fill” option is selected the ECU will use the value in the cell all the way to the left and the
cell value all the way to the right and interpolate the numbers in between so that the
values are linear.
Cell Values Selected in a Row
70 70 70 80
Interpolated Result from Cell Values Selected Above
70 73 77 80
If a series of cells in the same column are selected and the “Interpolate” “cell-fill” option is
selected the ECU will use the value in the cell all the way at the bottom and the cell value all the
way at the top and interpolate the numbers in between so that the values are linear.
Cell Values Selected in a Column
90
80
70
70
70
Interpolated Result from Cell Values Selected Above
90
85
80
75
70
If a range of cells (multiple rows and columns) are selected and the “Interpolate” “cell-fill”
option is selected the ECU will use the value in the cells at the bottom left and top left corners,
bottom left and bottom right corners and the bottom left and top right corners of the entire range
and interpolate the numbers in between so that the values are linear.
Range of Cell Values Selected
80 80 80 80
80 80 80 80
80 79 77 80
77 77 75 80
Interpolated Result from Range of Cell Values Selected Above
80 80 80 80
79 80 80 80
78 79 80 80
77 78 79 80
• Cancel – Hit cancel to disregard making any changes.
Cell
value to
the left Cell
value to
the left