MTS WIFT Mini Transducer Interface - Manual (Page 32)

SWIFT ® Mini TI 32
TI2STATUS - Transducer Interface Status
Software Utilities
Zero:
Indicates whether the transducer zeroing was successful or not (see , “Error
Messages,” on page 38 for a list of the possible errors).
F## Shunt:
Indicates the status of shunt test for each bridge (see , “Error Messages,” on page
38 for a list of the possible errors).
Calibration data is:
Indicates that the TI calibration data passed a data consistency check. The TI is
calibrated by itself, before system calibration is performed. this allows a TI to be
swapped without significantly affecting system calibration. For more information
see
, “Error Messages,” on page 38 for a list of the possible errors).
Unit serial number:
Displays the serial number of the TI box.