MK Diamond Scarifier - Manual (Page 41)

41
MK-Scarifier MaiNTeNaNce
Reconfigure the Cutting Drum
(A)
Remove the Cutting
Drum (See Cutting Drum
Change-out).
(B)
Place the Cutting Drum
on end and remove the 3
Retaining Screws using a
7/16-inch wrench.
(C)
Remove the Retaining Ring
from the Cutting Drum.
(D)
If present, remove the three
Flat Washer Spacers.
(E)
Place the Retaining Ring and
the 3 Flat Washer Spacers in
a secure location.
(F)
Pull the Cutting Disc Shafts
and remove the Cutting Discs
and Disc Spacers.
(G)
Assemble the Cutting Drum
using Cutting Discs and Disc
Spacers (See Cutting Drum
Configuration).
(H)
Continue with Step B
until the Cutting Drum as-
sembly is complete.
(I)
Place the Cutting Drum on
the closed end, with the open
end facing upward.