MK Diamond Scarifier - Manual (Page 31)

31
emergency engine Shutdown
MK-Scarifier OPeraTiON
(D)
Verify the Engage/Disengage
Lever is in the “Lift” position.
(E)
Raise the Cutting Drum to the
highest position.
(A)
Place Engine Master Switch
in the OFF position.
(B)
Move the Throttle Lever to
lower blade speed.
(C)
Place Fuel Valve in the
OFF position.
cLeaNUP
NOTeS:
Engine parts are extremely hot following use, allow engine to cool 1/2-hour before cleaning. Use care
during cleanup to avoid injury.
1. To extend operating life, the scarifier should be cleaned following every use.
2. Using a garden hose or pressure washer can force water into the air cleaner or
muffler opening.
3. Use care when cleaning around electrical components.
(A)
Clean the Scarifier with soap
and water.
(B)
Verify the engine is off and cool
before beginning to clean.
(C)
Clean around the Depth Con-
trol Wheel bearing.