MK Diamond Scarifier - Manual (Page 21)

21
MK-Scarifier aSSeMBLY
cUTTiNg DrUM aSSeMBLY
cutting Drum removal
(A)
Rotate the Scarifier to rest on
the Handle/Stand. Never rest
on back handle bar.
(B)
Locate the Shaft Cover, Re-
taining Bolts.
(C)
Remove the Shaft Cover,
Rear Retaining Bolt and
loosen the Front Retaining
Bolt using 9/16 wrenches
and/or sockets.
(D)
Pivot the Shaft Cover to
expose the end of the Cutting
Drum Shaft.
(E)
Remove the Shaft, Retain-
ing Nut Cover from the Belt
Guard to expose the Shaft,
Retaining Nuts.
(F)
Rotate counterclockwise to
using a 15/16-inch socket,
loosen the Outer Shaft, Re-
taining Nut.
(G)
Place an index finger on the
end of the Cutting Drum,
Shaft
(H)
Remove the Outer Shaft, Re-
taining Nut using your middle
finger as shown
(I)
Repeat Step H for the Inner
Shaft, Retaining Nut
Because the Cutting Drum assembly is a complex process, the assembly procedure will be broken
into several parts.