Lenze Loader L-force Loader - Manual (Page 32)

L-force Loader
Control via script files
Structure of the script file
32 DMS 4.0 EN - 07/2007
L
BinFile Path and file name of the DDS binary file for the download.
• Not indicated for target systems without PLC functionality.
• File indication is optional (only indicated files will be transferred to the target
system).
AddDataFile Path and file name of the application data for the download.
• Not indicated for target systems which do not support the download of
application data.
• File indication is optional (only indicated files will be transferred to the target
system).
ParameterSetFile Path and file name of the GDC parameter set file for the download.
• File indication is optional (only indicated files will be transferred to the target
system).
ApplicationFileSet Path and file name of the L-force Loader file (*.lfl) for the download.
• Only required for controllers of the "L-force 9400 Servo Drives" series.
DuplicateParameterSet Determines whether a parameter set is to be duplicated or whether the target
system is a replacement device:
0 = Target system is a replacement device (standard setting).
1 = Parameter set is duplicated.
Note:
• LECOM does not support the "Replacement device" function!
• This key is not evaluated for controllers of the "L-force 9400 Servo Drives" series.
Here the decision about which parameters are to be transferred is already made
in the Engineer at the export of the download data.
StartAfterDownload Determines whether the PLC program/L-force 9400 application is to be started after
download and parameter set transfer have been completed:
0 = PLC program/application not started (standard setting).
1 = PLC program/application started.
Key Parameter