Lenze Loader L-force Loader - Manual (Page 23)

L
DMS 4.0 EN - 07/2007 23
L-force Loader
Operation
How to select files for the download
5.4.3 How to open a GDC parameter set file
Click GDC parameter set file... to open a parameter set file created with Global Drive
Control (GDC) for the download.
M
How to open a GDC parameter set file...
1. Select the GDC parameter set file... function in the function area.
2. Select the desired file in the Open GDC parameter set file dialog box.
3. Click OK to confirm your selection.
• The selection is accepted and the dialog box is closed.
r If the parameter set file could be opened properly,
– the Close GDC parameter set file function will be available instead of the
GDC parameter set file... function. Use this function to close the parameter set file.
– the Download... function will be provided to download the file(s) to the target
system.
– the dialog area will display information about the opened parameter set file in the
Parameter set file tab.
r If it is not possible to open the parameter set file properly, an error message with an
error number will be displayed. Error numbers, causes & remedies
(C 36)
Next steps:
How to open a DDS binary file
(C 21)
/ How to open application data
(C 22)
or
How to download data
(C 25)