Lenze E94AYFLF Digital frequency module - Manual (Page 22)

Digital frequency extension module | Parameter setting & configuration
Digital frequency output
Parameter setting
22
L
EDS94AYFLF EN 3.2 - 10/2010
3.2 Parameter setting
Short overview of the parameters for the digital frequency output:

Note!
Depending on the module receptacle the digital frequency extension module is
plugged in, different code ranges are assigned to the parameters!
• Module receptacle MXI1: Parameters are in the C130xx range
• Module receptacle MXI2: Parameters are in the C140xx range
Parameter Info Lenze setting
  Value Unit
C13050 C14050 Signal source DFOUT Application
C13051 C14051 No. of increments DFOUT 2048
C13052 C14052 Zero pulse offset DFOUT 0 Increments
C13053 C14053 Frequency limitation DFOUT 500 kHz
C13061 C14061 TP delay time DFOUT 0 μs
C13070 C14070 Speed at DFOUT - Incr./ms
C13071 C14071 Frequency at DFOUT - Hz
C13072 C14072 Position at DFOUT - Increments
C13080 C14080 Resp. to frequency limit. DFOUT Warning
 Digital frequency extension module in module receptacle MXI1
 Digital frequency extension module in module receptacle MXI2
Greyed out = display parameter