1 about this documentation, About this documentation, 1about this documentation – Lenze I/O system 1000 User Manual
Page 3
Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
3
1
About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1
About this documentation
This documentation supplements the system manual for the I/O system 1000 by information on
how to configure and parameterise the I/O system with the »PLC Designer« engineering tool.
Target group
This documentation is directed at all persons who would like to parameterise, configure, and
diagnose the L-force I/O system 1000 using the L-force »PLC Designer« engineering tool.
Information regarding the validity
The information provided in this documentation is valid for the following standard devices:
Screenshots/application examples
All screenshots in this documentation are application examples. Depending on the firmware
version of the device and the software version of the installed »PLC Designer«, the screenshots in
this documentation may differ from the screen display.
Document history
Tip!
Information and tools all about the Lenze products can be found in the Internet:
Download
First, read the I/O system 1000 system manual before you start working.
The system manual includes safety instructions which must be observed!
Product series
Type designation
Version
I/O systems
I/O system 1000
From hardware version 1B or software version 10
Version
Description
1.2
11/2012
TD05 General revision of the document structure, extension of the module overview by
I/O compound modules EPM-S406 and EPM-S408.
1.1
07/2012
TD06 Extended by the "Commissioning of a counter" example
1.0
11/2011
TD11 First edition