Lenze I/O system 1000 User Manual
Page 23

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
23
4
Mapping the real station structure in the »PLC Designer«
4.4
Configuring I/O modules on the CANopen bus coupler module
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Adding the CANopen Manager to the CANbus
4. Select the "CANbus" device in the device view:
5. Now select the"CANopen Manager MC-CAN2" device in the still opened add device dialog
box.
6. Click Add device to add the selected device to the CANbus.
• The Add device dialog box remains open.
Adding the CANopen bus coupler module (slave) to the CANopen Manager
7. Select the "CANopen_Manager_MC_CAN2" device in the device view:
8. Now select the "EPM-S110" device (CANopen bus coupler module) in the still opened Add
device dialog box.
9. Click Add device to add the selected device to the CANopen Manager.
• The Add device dialog box remains open.
Adding I/O compound modules to the CANopen bus coupler module
10. Select the "EPM_S110" device in the device view:
11. Select the physically first I/O compound module in the still opened Add device dialog box
and add it by clicking Add device in the device view.