Lenze I/O system 1000 - Manual (Page 14)

4 Mapping the real station structure in the »PLC Designer«
4.1 Creating a new project in the »PLC Designer«
14
Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4 Mapping the real station structure in the »PLC Designer«
4.1 Creating a new project in the »PLC Designer«
You can create a new project in the »PLC Designer« without having to establish an online
connection. After having configured the project, go online with the I/O system 1000 to transfer
parameters.

How to create a new project in the »PLC Designer«:
1. Select menu command FileNew project to create a new »PLC Designer« project.
2. Go to the New project dialog window and select the
"Standard project" template.
• Go to the Name input field and assign a name for the »PLC Designer« project.
• Select the desired memory location under Location.
3. Confirm the entries by clicking OK.