Lenze I/O system 1000 - Manual (Page 16)

4 Mapping the real station structure in the »PLC Designer«
4.2 Configuring the I/O modules at the backplane bus of the L-force Controller
16
Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2 Configuring the I/O modules at the backplane bus of the L-force Controller
The L-force Controller consists of the following components:
• I/O bus coupler module: controller with a PLC control in the form of a soft PLC.
• I/O compound modules: Up to 64 modules which are connected to the controller via the Lenze
backplane bus.
[4-1] Schematic hardware installation with added I/O compound modules
In order to be able to access the modules by means of a PLC program (reading input signals and
writing output signals), the real station layout, i.e. the physical arrangement of the I/O compound
modules in the device view of the »PLC Designer«:
[4-2] Example: Mapping of the physical topology (module 1 to module 7) in the device view in the »PLC Designer«