Lenze Cam Designer Professional - Manual (Page 47)

L
3.0 EN - 08/2005 47
Cam Designer Professional
Appendix
Target systems
7 Appendix
7.1 Target systems
Main features of the Software Package - Cam
 48 profiles can be stored in the PLC
 289 base points per profile in the relative data model
 116 base points per profile the absolute data model
 Increased number of the available base points with reduced number of profiles re-
served
 48 cam groups can be stored
 Three tracks per cam group
 Four cams per track
Main features of the 9300EK servo cam
 8 profiles can be stored
 256 base points per profile in the relative data model
 64 base points per profile the absolute data model
The »Cam Manager« which is included in the »Cam Designer Professional«, reflects the
view on the machine and is the central input place for machine constants and profile data.
The »Cam Manager« helps you to create the minimum system by dialog boxes described in
detail. The Cam Manager serves to add and delete the tools and product data.