5 online connection to the drives, 6 downloading the drive data, Cam designer professional – Lenze Cam Designer Professional User Manual
Page 39
L
3.0 EN - 08/2005
39
Cam Designer Professional
Operation
Online connection to the drives
6.5
Online connection to the drives
The internal Lenze
is used for communication between »Cam Manager« and
target system and LCx-file transfer.
• The DriveServer provides easy integration of drives into open automation structures
based on
• A specially adapted variant of the DriveServer and the bus server for the system bus
(CAN) are part of the »Cam Designer Professional« installation package.
Select FileConnect to OPC server to connect the Cam Loader to the OPC server or
cancel the connection.
A hook in front of the menu command indicates the connection with the OPC serv-
er.
6.6
Downloading the drive data
If connection with the
server has been established, it is possible to transfer the drive
data for several slaves in one step.
The configuration files (LCx files) for the selected axes are created first.
If you have an online connection with the corresponding target system, the LCx file will
be directly transferred to the target system.
Note!
With the 9300 servo PLC, the LC9 file can only be downloaded if the target sys-
tem includes a DDS project based on Template Cam.