Leica Biosystems LN22 - Manual (Page 7)

7 Leica LN22
Be sure to comply with the safety instructions and warnings provided in this chapter.
Be sure to read these instructions, even if you are already familiar with the operation and use
of other Leica products.
2. Safety
2.1 Safety instructions
These operating instructions contain important
information for the operational safety and main-
tenance of the device and are an important com-
ponent of the device.
If additional requirements on accident
prevention and environmental protec-
tion exist in the country of operation,
this Instructions for Use must be sup-
plemented by appropriate instructions
to ensure compliance with such re-
quirements.
Device type
All information provided in this manual applies
only to the instrument type indicated on the cover
page.
An identification label with the serial number is
attached on the underside
of the control unit.
This instrument was built and tested in accord-
ance with the safety regulations for electrical
measuring, control, regulating and laboratory
devices as specified below:
• EN 61010-1:2001,
• EN 61326: 1997+A1: 1998 +A2: 2001
.
The protective devices on both instru-
ment and accessories must neither be
removed nor modified.
Only service personnel qualified by
Leica may repair the instrument and
access the instrument’s internal com-
ponents.