Leica Biosystems LN22 - Manual (Page 25)

25 Leica LN22
‘TEMPERATURE’ control panel
• To indicate the selected temperature value,
press the + / - button (4) below the tempera-
ture indication briefly (less than four seconds).
• To alter the selected temperature value, press
the + / - button (4) for a longer period of time.
The temperature measuring unit (K, °C, °F) (12) is
changed via the software. See ‘Control panel -
OPERATION’ on how to actually change the tem-
perature indication.
‘MEMORY’ control panel
Parameters that are used often can be saved:
• To save these parameters, press STO (5) and
one of the 3 storage buttons (6, TA, TB, TC).
• To activate the individual saved parameters,
press the corresponding storage button (6, TA,
TB, TC).
4.7 Control unit
Fig. 18
Fig. 18 a
Fig. 18b
1 2 3
4
12
5
6
Key combination:
Knife + specimen
4. Startup
+