Leica Biosystems SP2600 - Manual (Page 34)

34 Supplementary instruction manual V 1.2 – 07/2002
5.6 Preparatory steps prior to the milling procedure
For a detailed description of all control elements located on the
control unit, please refer to chapters 5.3 (‘Overview - control
panel’) and 5.4 (‘Description of each individual control element’) of
the Leica SM2500 instruction manual.
• Select manual mode of operation MAN (button (5) - chapter 5.4.3, page
26, Leica SM2500 instruction manual).
In ‘MAN’ mode, carry out the following preparatory steps:
• Move the milling spindle to the upper limit position (button (48), chapter
5.4.13, p. 36, Leica SM2500 manual) and open the plexiglass cover.
• Attached the miller holder (1) (containing the adjusted pre-miller) to the
milling spindle (use Allen screws size 5 (2) / Allen key size 5 - part of
SP2600 standard delivery).
Always slide plexiglass cover to upper position prior to attaching
the miller holders to the milling spindle!
5. Operation
Fig. 5.22
1
2